This week’s listing begins with the primary customized Honda Gyro X we’ve ever featured, courtesy of Deus ex Machina’s Japanese outpost. We then function a Harley Evo chopper by CW Zon, a Moto Guzzi Le Mans by 46Works, and a Honda CB360 from the one builder not primarily based in Japan—Slipstream Creations.

Honda Gyro X by Deus Japan Honda has manufactured some quirky and cute bikes over time. This offbeat customized from Deus ex Machina in Japan makes use of considered one of them as a base; the Honda Gyro X.

In manufacturing since 1982 in numerous varieties, the Gyro X is a 49 cc, 4.6 hp three-wheeled scooter bought principally in Japan. It’s principally used as a supply automobile—however Deus Japan head wrench, Tomoyuki Soeda, had different plans for the store’s humble Honda Gyro X. He turned it right into a cheeky runabout, aptly nicknamed ‘Tumbleweed.’

The first step was to liberate the Gyro X of a few of its plastic bodywork. Gone are the rear wheel mudguards, and the steering cluster that usually homes the headlight. Twin LED headlights now do responsibility decrease down, connected to the Gyro X’s entrance baggage rack.

The cockpit sports activities an aftermarket speedo and gasoline gauge, and recent grips. And when you’re questioning what that bizarre paddle close to the steering stem is, it’s the Gyro’s OEM parking brake.

There’s new upholstery on the seat, with tread plate on the rider’s toes including a contact of sass. The colour scheme is tasty too—an ultra-creamy gray offset by matte bronze accents.

Soeda-san designed the Gyro X to be a utilitarian day by day runner centered on all of Deus’ common pursuits—together with browsing. To that finish, the store fabricated a detachable overhead surf rack and added a pair of HiKOKI toolboxes to the again.

That is the primary time we’ve seen a customized Honda Gyro X, but it surely hopefully received’t be the final. It may need been inbuilt Asakusa, however we’d experience it in any metropolis. [More]

Harley-Davidson Evolution chopper by Customized Works Zon Taking a look at this otherworldly Harley Evo chopper, it’s simple to see why Custom Works Zon is taken into account considered one of Japan’s high customized retailers. Yuichi Yoshizawa and Yoshikazu Ueda can apply themselves to virtually any fashion of customized construct, producing jaw-dropping work each time.

CW Zon’s skillset is on full show right here. A closely modified Harley-Davidson Evolution motor takes heart stage, sporting a basic factors ignition, an open BDL main, and an S&S carb. The air cleaner and exhausts are customized elements, as is the hand-shifter.

The engine sits inside a chic single-down-tube inflexible body, constructed from scratch by CW Zon. A thin springer setup sits up entrance, and the bike rolls on 21F/18R alloy wheels. Regardless of the classic fashion, this Evo makes use of fashionable KustomTech brakes and Michelin tires.

The management space is as sparse because it will get, carrying nothing greater than a set of swooping direct-mount bars, fitted with a throttle and entrance brake lever. A Daytona Velona speedo sits decrease down, simply to the left of the engine. The headlight’s a CW Zon half, whereas the sissy bar-mounted taillight comes from Motone.

CW Zon fabricated the Harley’s gasoline tank, oil tank, and rear fender, whereas Kamikaze laid down the intricate paint job. A slim king and queen seat sits up high, with new rider and passenger pegs rounding out the construct.

The general design is sleek from afar, and solely will get higher the nearer you get. Like all of CW Zon’s initiatives, this one calls for hours of scrutiny. [Via]

Moto Guzzi Le Mans 1000 by 46Works Shiro Nakajima at 46Works has constructed his fame on creating timeless customs primarily based on standard European bikes. This 1987 Moto Guzzi Le Mans is a worthy addition to his illustrious portfolio; a cultured roadster that speaks to Nakajima-san’s racing background.

Working from his house workshop within the impossibly picturesque Japanese countryside, Shiro began with little greater than the Moto Guzzi’s body, engine, and wheels. There are some apparent modifications, just like the customized gasoline tank, stubby seat, and cut-‘n’-looped body. However the actual genius right here is the stuff that’s onerous to pinpoint.

The forks look basic, however they’re fashionable Ceriani replicas from CR Suspension. The rear shocks are Öhlins models, and the dual entrance brake system makes use of Brembo calipers. And when you’re an enormous fan of the Le Mans, you would possibly discover that Shiro has even reworked the steering neck to tweak the bike’s geometry.

Decrease down, new Excel rims put on fashionable rubber with a classic tread sample. Customized twin exhaust headers snake their method right into a pair of reverse-cone mufflers, whereas a pair of FCR carbs are fitted with pod filters.

Shiro’s forte is ending his bikes so properly, that they really feel virtually like classic manufacturing unit specials. This Guzzi is not any exception—from the low-rise avenue bars to the way in which the headlight and speedo are neatly tucked into the entrance finish, all the things right here appears prefer it belongs. The livery is equally gorgeous, mixing blue and uncooked metallic textures with delicate pin-striping.

In the event you actually need to geek out over Shiro’s work, head on over to his YouTube channel. He’s gone behind the scenes, detailing the work on this Moto Guzzi in at least 15 movies. Seize your favourite Sunday beverage, sit back, and luxuriate in. [Via]

Honda CB360 by Slipstream Creations It’s very easy to identify considered one of James Fawcett’s customized bikes. He favors small-capacity Hondas, and he builds them clear and easy with stylish paintwork.

This crisp Honda CB360 scrambler is the newest bike to roll out of James’ workshop, Slipstream Creations, in St. Louis, Missouri. His shopper reached out after seeing Slipstream’s earlier builds on-line, and needed a “enjoyable classic scrambler restomod.” James already had a 1975-model CB360 available, together with a fairly good concept of what his shopper wanted—so the undertaking was off to begin.

The Honda CB360 was shortly stripped down and handled to a streamlined new subframe. A Honda CL350 gasoline tank went on by way of a set of customized mounts, slimming the bike’s profile additional. To tweak the stance, James laced a set of 18” rims with Buchanan’s spokes, then spooned on chunky Shinko dual-sport tires.

The donor bike confirmed little or no mileage, however James rebuilt the engine’s high finish anyway. It’s fed by twin Mikuni VM30 carbs and exhales by way of a set of CL360 scrambler pipes, completed off with stubby silencers. James tweaked the headers to higher match the traces of the bike, then Cerakoted the entire system in satin black.

James additionally introduced the 70s Honda into the fashionable age with an digital ignition, an up to date regulator/rectifier, and a Lithium battery. There’s LED lighting throughout, with the flip alerts built-in into the head- and taillights. A digital gauge from Path Tech adorns the cockpit.

Take a better have a look at the again, and also you’ll spot mounting factors for a detachable baggage rack. James included this on the shopper’s request so as to add some practicality to the construct.

James does his personal paintwork too, and this CB360 is considered one of his greatest. Inexperienced and gold accents shine towards the white of the gasoline tank and body, with outsized Honda Wing logos including a contact of retro fashion. Like all the things else that James has constructed, this scrambler is the epitome of fine style. [More]