Review: Speedybee TX1600 Ultra VTX (1.6W Analog Video Transmitter)


The Speedybee TX1600 Extremely video transmitter is a compact powerhouse on the earth of VTXs, boasting a 20x20mm mounting and a powerful output energy of as much as 1600mW. Designed for long-range flights and powerful sign penetration, it’s a super alternative for the intense FPV pilots.

A number of the hyperlinks on this web page are affiliate hyperlinks. I obtain a fee (at no further value to you) in the event you make a purchase order after clicking on one in all these affiliate hyperlinks. This helps assist the free content material for the neighborhood on this web site. Please learn our Affiliate Link Policy for extra data.

For a deeper dive into VTX, I like to recommend trying out our purchaser’s information: https://oscarliang.com/video-transmitter/

The place to Purchase?

Obtainable for buy at these retailers:

Regardless of the producer labeling it as “TX Extremely” on their product web page, it’s the identical because the TX1600. Contains the next equipment:

  • 1x MMCX Antenna
  • 1x MMCX to SMA Cable
  • 1x 1.0mm 4pin JST Cable

Speedybee Tx1600 Ultra Vtx Video Transmitter Unbox Accessories

Specs

  • Frequency & Channels: 5.8GHz, 48 Channels throughout 6 Bands
  • Output Energy: PIT / 25mW to 800mW / 1600mW (MAX)
  • Working Present: 12V @ 90~560mA
  • Enter Voltage: 7-28V (helps as much as 6S)
  • Output Voltage: 5V @ Most 300mA
  • Video Enter Impedance: 75 Ohm
  • Antenna Connector Sort: MMCX
  • Weight: 3.2g with out heatsink/antenna, 5.7g with heatsink, 7.0g with heatsink/antenna
  • Dimensions: 29x28x6mm
  • Mounting Holes: 20x20mm M2

Design and Kind Issue

The TX1600, geared up with a detachable heatsink, is remarkably light-weight at simply over 3 grams. Nevertheless, I like to recommend utilizing it with the heatsink, particularly at increased output ranges, to attenuate the danger of overheating.

Speedybee Tx1600 Ultra Vtx Video Transmitter Under Heatsink Pcb

Its 20x20mm mounting matches completely into trendy freestyle frames, such because the Source One V5, and the PCB’s extensive screw holes accommodate M3 screws simply. For M2 bolts, washers could also be wanted for a cosy match.

Antenna

That includes a sturdy MMCX antenna connector, it’s way more sturdy than the smaller U.FL connectors. The bundle consists of an MMCX to SMA cable for versatile antenna mounting.

Speedybee Tx1600 Ultra Vtx Video Transmitter Cable Antenna Connected

Whereas the included fundamental dipole antenna is ample for short-range flights, I counsel upgrading to a higher-quality antenna for improved efficiency: https://oscarliang.com/best-fpv-antenna/#The-Best-FPV-Antennas-for-FPV-Drones

Essential: By no means energy the VTX with out an antenna connected, because it dangers overheating and injury.

Utilization and Connection

The TX1600 is provided with three LED indicators (blue, crimson, orange) to show the present channel, band, and energy degree. There’s additionally a push button for adjusting settings, however it’s cumbersome to make use of. As a substitute, I like to recommend organising VTX Management in Betaflight and utilizing the OSD menu for adjustments. Notice that this VTX makes use of the IRC Tramp protocol, not SmartAudio.

For connecting to the flight controller, you’ll be able to both use the included JST connector cable or solder wires on to the VTX pads.

It has a 5V output however solely has sufficient present for powering issues like your FPV digital camera. Most FC has devoted 5V for cameras anyway so you’ll be able to usually go away the 5V on the VTX unconnected.

Supported Channels and Bands

It helps the next 5.8GHz channels:

Unlocking the TX1600

Out of the field, the TX1600 video transmitter got here locked, limiting some channels (in orange), and limiting energy to solely 25mW. You’ll be able to entry all of the channels and as much as 1600mW by unlocking the VTX.

To unlock the TX1600, merely lengthy press the button for 10 seconds.

You’ll be able to lock the VTX once more by holding down the button for 10 seconds.

Find out how to Change Channels/Energy?

To regulate VTX settings, you’ve got two choices:

  1. Use the push button on the VTX.
  2. Make the most of the Betaflight OSD menu or a LUA script.

For button operation:

  • Quick press the button to modify CH1/2/3/4/5/6/7/8.
  • Lengthy press the button for two seconds to enter the BAND mode; then quick press to
    change band1/2/3/4/5/6.
  • Lengthy press the button for 4 seconds to enter the POWER mode; then quick press to
    change to 25/200/800/Max mW.
  • Lengthy press the button for 10 seconds to unlock/lock.

LED indicators which means:

Speedybee Tx1600 Ultra Video Transmitter Button Operation Change Channel Bands Power Levels

To have the ability to change VTX settings through Betaflight OSD menu, it’s important to setup VTX management as defined beneath.

VTX Management Setup (VTX Desk)

To allow VTX management through Betaflight, join the IRC pad from the VTX to a TX pad on a spare UART in your flight controller.

Speedybee Tx1600 Ultra Video Transmitter Connection Wiring Diagram Pinout

In Betaflight’s Configurator, below the Ports Tab, choose “IRC Tramp” for the corresponding UART.

For VTX control to work correctly in Betaflight, it is advisable copy this snippet within the CLI:

# vtxtable
vtxtable bands 5
vtxtable channels 8
vtxtable band 1 BOSCAM_A A CUSTOM 5865 5845 5825 5805 5785 5765 5745 5725
vtxtable band 2 BOSCAM_B B CUSTOM 5733 5752 5771 5790 5809 5828 5847 5866
vtxtable band 3 BOSCAM_E E CUSTOM 5705 5685 5665 0 5885 5905 0 0
vtxtable band 4 FATSHARK F CUSTOM 5740 5760 5780 5800 5820 5840 5860 5880
vtxtable band 5 RACEBAND R CUSTOM 5658 5695 5732 5769 5806 5843 5880 5917
vtxtable powerlevels 4
vtxtable powervalues 25 200 800 1600
vtxtable powerlabels 25 200 800 MAX

Study extra about VTX desk right here: https://oscarliang.com/smartaudio-tramp-vtx-control-vtxtables/

VTX Pit Mode

The TX1600 helps Pit Mode activation through a change, it principally reduces the output energy of your VTX to an especially low degree (solely sufficient for a couple of meters of vary) so it received’t interrupt different pilots whereas they’re nonetheless within the air, it additionally retains your VTX cooler. It’s helpful for troubleshooting when you find yourself in a race/meetup or when your quad is down.

Within the Modes tab within the Configurator, assign an Aux channel to VTX Pit Mode.

Output Energy Testing

I examined the TX1600 utilizing the ImmersionRC Power Meter V2. Whereas the outcomes are usually not probably the most correct as a result of take a look at gear being hobbyist degree. the numbers look fairly first rate in comparison with different VTX I’ve examined prior to now. Wondering which channel is best for FPV? Check out this post.

Throughout testing, I discovered the VTX skipped 200mW and MAX ranges. When choosing 200mW, it output the 800mW degree, whereas choosing 800mW degree, it output the MAX (1600mW) degree. Undecided what was happening however at the very least we all know it’s doing that.

R1 R2 R3 R4 R5 R6 R7 R8
5658 5695 5732 5769 5806 5843 5880 5917
25mW 26.9 26 25.5 22.6 19.3 17 14 10.5
200mW / / / / / / / /
800mW 660 / / / / / / 320
MAX 1398 / / / / / / 1202

Conclusion: Is the TX Extremely for you?

Do you want the TX1600 or TX800?

Even with some fundamental onmi directional antenna on each the transmitter and receiver, you’ll be able to anticipate to get 2km of vary on 800mW in best circumstances. With good directional antennas in your goggles, it’s best to be capable to double your vary (or extra). At 1400mW as examined, the TX1600 provides about 2.5dB of extra energy than the TX800, that’s about 36% enhance in vary. Not likely a day and evening distinction, however enchancment in penetration ought to be noticeable. Study extra about find out how to calculate FPV vary on this tutorial: https://oscarliang.com/calculate-fpv-range/#How-to-Calculate-FPV-Range-with-dB

You may get the TX1600 VTX from these distributors:

Be conscious of the elevated threat of overheating which could affect VTX efficiency, guarantee good airflow and take off as quickly as doable. Additionally it will probably get noisier for different pilots close by when working at most output energy.

The opposite consideration is enter energy. The TX800 solely takes 5V which could be very limiting, whereas the TX1600 can take 7-28V,  which means it’s doable to energy it straight from a LiPo. Nevertheless it’s usually not beneficial to energy VTX straight from LiPo as a result of it’s often very noisy, inflicting noise in your video feed. It’s finest to energy VTX from a regulated energy supply, such because the 9V BEC on a flight controller, which is quite common these days. In that case the TX1600 is ideal.

For most individuals, I feel the TX800 may be adequate and provides higher worth for most individuals, however the TX1600 provides wider vary of enter voltage assist and extra vary and penetration. The selection boils all the way down to your necessities.

Get the TX800 right here in case you are : https://oscarliang.com/speedybee-tx800/

Latest news
Related news

LEAVE A REPLY

Please enter your comment!
Please enter your name here