Review: Jumper T20S Gemini Radio Transmitter – Flawed or Unlucky?

Review: Jumper T20S Gemini Radio Transmitter – Flawed or Unlucky?

[ad_1]

The Jumper T20S Gemini represents an evolutionary step on this planet of radio transmitters, boasting an inner ExpressLRS RF module with twin transmitters. This modern design facilitates Gemini Mode, a function that units it aside within the present radio market. Nonetheless, my assessments reveal some potential considerations with its 1W output. Let’s discover these findings in depth.

A number of the hyperlinks on this web page are affiliate hyperlinks. I obtain a fee (at no further price to you) when you make a purchase order after clicking on considered one of these affiliate hyperlinks. This helps help the free content material for the group on this web site. Please learn our Affiliate Link Policy for extra info.

New to FPV? You possibly can study extra about FPV drone radio transmitters on this purchaser’s information: https://oscarliang.com/radio-transmitter/

The place to Purchase?

You should purchase the Jumper T20S Gemini from these distributors:

Jumper T20s Gemini Radio Transmitter Unbox Accessories Case

Design and Construct High quality

Externally, the T20S Gemini mirrors its predecessor, the T20S, by way of design, construct, interface, ergonomics, and RDC90 gimbals. Right here’s a facet by facet comparability between these fashions. Observe: My T20S has undergone varied modifications, particulars of which you will discover right here:

Jumper T20s Gemini Radio Transmitter Compare T20 Original

Under are some detailed photographs of the T20S Gemini version.

Jumper T20s Gemini Radio Transmitter Dissemble Gimbals

Jumper T20s Gemini Radio Transmitter Switches Front

Jumper T20s Gemini Radio Transmitter Switches Back

The important thing distinction is the built-in Gemini Mode transmitter module and its twin folding antennas, designed to be positioned at 90 levels to one another for optimum efficiency.

Jumper T20s Gemini Radio Transmitter Folded Antennas

Jumper T20s Gemini Radio Transmitter Unfolded Antenna

I’m not going into particulars concerning the gimbals, switches, person interface and ergonomics on this assessment, since they’re an identical to the unique T20S. In case you want to know extra take a look at my earlier assessment: https://oscarliang.com/jumper-t20-radio/. As a substitute, I’ll give attention to what units this mannequin aside.

Gemini Mode Help

The standout function of the T20S Gemini version is its Gemini Mode functionality.

Jumper T20s Gemini Radio Transmitter

Now, if you’re unfamiliar with Gemini Mode, take a look at on this put up: https://oscarliang.com/expresslrs-gemini/. To place it merely, there are 2 transmitters contained in the radio, which is able to transmitting 2 packets concurrently on separate frequencies, growing redundancy and reliability of the radio hyperlink. It doesn’t essentially improve vary however considerably improve hyperlink high quality particularly in noisy atmosphere.

As a result of elevated energy consumption and warmth, it has a cooling fan hooked up to the heatsink on the again. The fan could be very quiet and you’ll hardly discover it when operating.

Jumper T20s Gemini Radio Transmitter Back Cooling Fan

With larger sophistication comes the next worth level and the necessity for appropriate “true variety” receivers, additional growing the associated fee. Right here’s an instance of “true variety” receiver: https://oscarliang.com/expresslrs-diversity-receivers/#BetaFPV-SuperD

For individuals who fly in brief to medium distance and open subject, the unique model is greater than sufficient in my view. Nonetheless the Gemini model provides higher radio hyperlink reliability in difficult atmosphere.

The T20S Gemini can be appropriate with customary receivers (non variety), merely change to the normal antenna mode within the ExpressLRS LUA script (ANT 1 or ANT 2 modes). To make use of Gemini Mode, merely put Antenna mode to Gemini within the configuration.

Jumper T20s Gemini Radio Transmitter Screen Display Expresslrs Gemini Antenna Mode

Exterior Module Bay

The T20S Gemini may not include a built-in module bay, nevertheless it does help exterior modules. There are screw holes on the cooling fan on the again, particularly designed for putting in a detachable module bay adapter. Nonetheless, understand that this adapter isn’t included within the bundle and can must be bought individually.

Peeling again the rubber cowl beneath the cooling fan reveals the XT30 energy output (7.4V 1.5A) and a knowledge port for connecting to an exterior module.

Jumper T20s Gemini Radio Transmitter Back External Module Output

ExpressLRS

The T20S Gemini options an inner ExpressLRS module. You possibly can flash its firmware in ExpressLRS Configurator, the firmware goal “Jumper Gemini T-20 2.4GHz TX” is now accurately listed below “System”. Updating the firmware was a breeze for me utilizing the passthrough technique.

A fast tip for these updating: at all times make sure you’re working with the newest LUA script. Seize the most recent model, substitute the outdated script in your SD card’s SCRIPT > TOOLS Folder, after which take away the outdated information, i.e. elrsV3.luac and elrsV3.lua.

In case you are new to ExpressLRS, take a look at my detailed setup information: https://oscarliang.com/setup-expresslrs-2-4ghz/

EdgeTX

The Jumper T20S Gemini comes preinstalled with EdgeTX firmware, which is presently probably the most broadly used radio firmware within the FPV group.

A notable function concerning the T20S is its elimination of the SD card slot. And no, it’s not an oversight. In truth, the T20 doesn’t even require an SD card. As a substitute, it boasts an onboard 512MB flash reminiscence. This serves as a storage for what’s sometimes termed as “SD Content material” the place mannequin photographs, audio information and radio backups are saved. Meaning you gained’t have to buy an SD card individually.

You possibly can entry the storage by way of the USB-C port: join the cable whereas the radio is energetic, when prompted, choose the USB Storage (SD) possibility.

When you doubtless gained’t have to mess with firmware when the radio arrives, it’s actually attainable to flash EdgeTX firmware utilizing one of many two strategies described in my tutorial: https://oscarliang.com/flash-edgetx/

Battery

The included battery holder accommodates two 21700 batteries, although it’s attainable to suit 18650s. This flexibility is a plus for customers with totally different battery preferences.

Jumper T20s Gemini Radio Transmitter Battery Compartment

Batteries aren’t included, and must be bought individually. Get them right here:

21700 Li-ion cells:

18650 Li-ion cells:

For these utilizing 21700, brace for a decent match. It takes a agency push to shut the battery bay lid. The holder additionally helps 18650, simply pull the contacts outwards with a pair of pliers, to allow them to maintain the smaller 18650 cells securely. I personally choose 18650 for its light-weight and general weight stability, even when it trades off some battery longevity.

Energy Consumption and Battery Life

The Gemini’s energy draw varies with the RF energy setting. Right here’s what I noticed:

Gemini Mode:

  • 0.40A at 25mW
  • 0.59A at 250mW
  • 1.12A at 500mW
  • 0.76A at 1W

Ant1 / Ant2 Modes:

  • 0.28A at 25mW
  • 0.40A at 250mW
  • 0.59A at 500mW
  • 0.60A at 1W

The T20S Gemini appears to make use of a bit extra energy than the unique model probably because of the cooling fan.

Surprisingly, the 1W setting attracts much less present than anticipated. It’s confirmed by my RF output testing, the radio produce solely round 400mW energy at 1W settings, therefore the low present draw (extra particulars in Output Energy Testing part beneath).

A notable level is the elevated battery consumption in Gemini Mode on account of powering two transmitters. Customers needs to be ready for a quicker battery drain when utilizing the Gemini Mode.

Right here’s a tough estimation of battery life:

  • In Gemini Mode, utilizing 21700 4500mAh cells, you may count on round 12 hours of run time at 10mW, or roughly 4 hours at 500mW. With 18650 3000mAh cells, this drops to roughly 8 hours at 10mW or about 2.5 hours at 500mW.
  • In Ant 1 or Ant 2 modes, utilizing 21700 4500mAh cells, you may count on round 14 hours of run time at 10mW, or roughly 7 hours at 500mW. With 18650 3000mAh cells, this drops to roughly 9 hours at 10mW or about 4.5 hours at 500mW.

To optimize battery life, you may make the most of the Dynamic Energy possibility obtainable within the ExpressLRS LUA script. With Dynamic Energy, the mW output adapts to the mannequin’s vary, sign energy and hyperlink high quality, minimizing energy consumption. This function permits for as little as 10-25mW utilization throughout unobstructed line-of-sight flights.

Charging

Aside from knowledge connection, the USB-C port situated on prime can be used for battery charging.

Jumper T20 T20s Radio Transmitter Top Switches Slider Buttons Usb C Connector Trainer Port

One of many downsides of the T20S Gemini is its sluggish charging. PD chargers don’t appear to work correctly, and it solely help regular 5V chargers. Consequently, its cost fee is a modest 4W, dropping even decrease because the battery nears full cost.

Estimated charging instances are as follows:

  • 21700 4500mah batteries: Roughly 9 hours
  • 18650 3000mah batteries: Just below 6 hours

Enjoying Simulators

The Jumper T20S Gemini is plug and play with in style FPV simulators reminiscent of Tryp and Liftoff. When linked, it’s routinely acknowledged within the simulator and exhibits up as “Radiomaster TX16S”. Whereas it’s the fallacious mannequin, it doesn’t have an effect on utilization, and the setup stays the identical as all different mainstream remotes.

Tear Down

Disassembling the Jumper T20S Gemini may be considerably cumbersome as there are a lot of screws includes. To start out, gently pry out the rubber inserts on the again. Then, unscrew the ten screws which maintain the back and front housing collectively. Don’t overlook to loosen the 2 prime switches throughout this course of.

Jumper T20s Gemini Radio Transmitter Dissemble Remove Screws

Be cautious of the three cables connecting the back and front housing, which must be unplugged first earlier than pulling the radio aside.

Jumper T20s Gemini Radio Transmitter Dissemble Pcb Cable Connection

All of the switches are linked to the mainboard utilizing cables. This design alternative simplifies any restore or replacements you may have to do down the street.

Jumper T20s Gemini Radio Transmitter Dissemble Main Pcb

The construct high quality and inner designs are largely just like the unique T20, aside kind the PCB shade (was inexperienced however now black), and the RF module boards.

Jumper T20s Gemini Radio Transmitter Dissemble Rf Board

Output Energy Testing

Listed below are the ability measurements of the Jumper T20S Gemini’s inner module at totally different output energy ranges. These measurements had been taken utilizing the ImmersionRC Power meter V2.

Gemini Mode

Energy Ranges 25mW 50mW 100mW 250mW 500mW 1W
T20S Inside Module 21mW 47mW 86mW 211mW 462mW 404mW

Antenna 1

Energy Ranges 25mW 50mW 100mW 250mW 500mW 1W
T20S Inside Module 21mW 45mW 85mW 208mW 450mW 490mW

Antenna 2

Energy Ranges 25mW 50mW 100mW 250mW 500mW 1W
T20S Inside Module 25mW 55mW 101mW 233mW 482mW 425mW

Apparently, at 1W, the output is round 400-500mW. I repeated the take a look at 3 instances, tried totally different ExpressLRS configurations, and likewise tried increased enter voltage, comparable outcomes. May this point out a flawed inner RF module, or am I simply unfortunate with a nasty unit? Anyway, 500mW appears to be extra promising, so I examined it additional for consistency.

Jumper T20s Gemini Radio Transmitter Testing 500mw Output Power

After a 20-minute take a look at at 500mW in Gemini mode, the output stabilized at round 450mW. The cooling fan appears to be efficient in retaining the module cool. I’d in all probability keep away from utilizing 1W setting with my T20S Gemini radio, and follow 500mW.

Easy methods to Setup

I’ve a tutorial on how you can setup the T20S from scratch: https://oscarliang.com/setup-jumper-t20s-radio/

Conclusion

Jumper T20s Gemini Radio Transmitter Side Bottom

Gemini Mode is especially well-suited for pilots who function in RF-noisy environments or require a extremely dependable hyperlink for his or her flights. Its attraction extends to each hobbyists and professionals who may expertise interference points with customary transmitters.

You should purchase the Jumper T20S Gemini from these distributors:

Jumper is the primary to launch a radio with built-in Gemini appropriate module. Whereas their pioneering effort is commendable, there appears to be points with the 1W output – whether or not a singular defect or a broader high quality management drawback – is a priority. Fortuitously, the 500mW efficiency appears to be strong in my testing, providing a dependable various for many customers.

In case you want to run Gemini at 1W output energy, presently your greatest wager is the BetaFPV SuperG module which I’ve reviewed: https://oscarliang.com/betafpv-superg-nano-transmitter-module/

In case you want to run 1W settings with out Gemini Mode, get the unique T20S, which can be cheaper: https://oscarliang.com/jumper-t20-radio/

[ad_2]

Tags

Leave a Reply

Your email address will not be published. Required fields are marked *

About Author

Alex Lorel

Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed do eiusmod tempor incididunt ut labore et dolore magna aliqua veniam.

Categories