The Traxxas Utility Trailer is an effective way to observe your driving abilities or to boost the TRX-4M’s practical scale look. The practical trailer seems nice proper out of the field and carries loads of scale gear. Similar to a full-size trailer, the out there stake side panels improve the hauling capability with a enjoyable and practical look.

The stake sides are molded with textured wooden grain for an genuine look. For much more element, you may paint the stake sides to look stained and weathered, identical to actual wooden. The method makes use of paints and different supplies out there out of your native pastime retailer. Learn on to learn how.

Here is What You will Want:

9798 Utility Trailer Stake Sides

Dish Cleaning soap

Paper Towels

Nitrile or Cotton Gloves

Set of Small Paint Brushes

Disposable Cups

Acrylic Paint Thinner

Primer

Acrylic Craft Paints

5047 ProGraphix^® Matte Ending Spray

Making ready the Floor for Portray

Step 1. Paint wants a clear floor to bond correctly. Wash the stake sides with dish cleaning soap and rinse them completely earlier than permitting them to dry. Use nitrile gloves when you have them or attempt to keep away from dealing with the elements as a lot as potential. Oil out of your fingers may trigger paint to stick poorly and flake off.

Step 2. Spray the elements with one or two very gentle coats of primer. You wish to cowl the elements utterly, however do not use a lot that you just cowl up the wooden grain texture.

Step 3. Apply a skinny base coat of paint on prime of the primer. Acrylic paints are too thick for this goal, so skinny them barely with acrylic paint thinner.

We selected a shade of beige for the bottom coat and utilized it frivolously with a paint brush. Cowl the stake sides utterly utilizing a really gentle coat.

Step 4. As soon as the bottom coat has dried utterly, it’s time to use the weathering colour. We selected a shade of acrylic paint known as Burnt Umber. The paint is simply too thick to use out of the bottle so a light-weight paint wash was used. To create the wash, add about 10 ml of water to a small cup after which combine it with a couple of drops of paint and some drops of thinner. The answer can be very watery, however the secret is to use a number of skinny layers to construct up the specified colour.

Step 5. Apply gentle coats of the brown wash to the stake sides. The skinny resolution ought to simply work its approach into the cracks. As soon as one aspect is dry, flip it over and paint the opposite aspect. Don’t neglect to color the tops and edges too.

Step 6. Permit the primary coat of wash to dry utterly earlier than making use of a second coat. Use gentle brush strokes and don’t scrub the floor with the comb or the earlier layers may very well be eliminated.

Step 7. Permit the second coat to dry utterly. Discover how some areas are darker than others. That is what simulates actual staining and weathering on wooden. Apply a light-weight coat of ProGraphix matte ending spray to your complete floor. This retains subsequent layers from erasing the earlier ones. As soon as the matte layer dries, add extra layers of wash. The trick is to darken the areas which are already darkish.

Step 8. Apply as many layers because it takes to get the specified impact, however use a recent coat of matte ending spray after each two layers to guard the earlier coats. Remember to let the whole lot dry first.

Step 9. The following step is much like the final, besides this stage makes use of an acrylic black paint for the wash. The darker black paint will assist outline the element and produce out the woodgrain impact. The black wash must be much more diluted than the brown. Apply one gentle coat to the whole lot and let it dry. Repeat the method as many occasions as essential to get good coloring.

Step 10. For the ultimate step, add somewhat extra black wash to locations that have been already darkish. This can higher simulate weathering of actual wooden. Use the black wash to simulate knots or different imperfections within the wooden.

Step 11. As soon as the colour and element look practical, permit the whole lot to dry utterly and spray one other gentle coat of matte ending spray to seal the paint. Apply heavier coats of black paint resolution to simulate the steel rails on the ends of the stakes. When the whole lot is completed, seal it with a closing coat of matte ending spray and admire the completed product.

These weathered stake sides look nice and add superb element to the utility trailer. If you happen to loved this text, try a few of the different methods you may add customized touches to your car. You may add distinctive wheel details or customize your accessories. Let your creativeness run wild and you should definitely put up footage of your creations on our Facebook page.

Store for the Utility Trailer and all Traxxas TRX-4M equipment within the hyperlink under.